Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Offline jcmwjl  
#1 Posted : Friday, February 10, 2023 3:29:46 AM(UTC)
jcmwjl

Rank: Member

Groups: Registered
Joined: 2/10/2023(UTC)
Posts: 10

Autoclave Aerated Concrete Machinery manufacturers Mold and mold base
Mold and mold base: The combination of the two can hold the slurry, The mold base also carries the blank body to the cutting machine for cutting, and is combined with the steaming trolley to enter the autoclave for steaming.
Introduce
Mold frame: The mold frame is the main body of the mold. When the side plate is combined with it, the clamp body can be cast by turning it tightly and turning it by 90掳. After pouring, flip the spreader to lift its volley, turn it 90掳, make the blank stand upright, hang it to the cutting cart, loosen the clamping arm, take off the mold frame, and the blank can be cut.
Mold base: The mold base is the wall panel on the open side of the closed mold frame. It is clamped by the clamping arm and tightly closed with the mold frame sealing strip. It is turned 90掳, and the mold is removed on the cutting trolley to become the bottom plate of the blank body.
Features
1. Frame structure, good rigidity and light weight
2. Flip shafts at both ends with sealing strips to prevent pouring leaks
3. Reasonable structure, flipping sensitiveAutoclave Aerated Concrete Machinery manufacturers
website:http://www.jxjq.com/autoclave-aerated-concrete-machinery/
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.